4026, WHITE, 33M X 25MM

Page 1 of 6 3M™ Double Coated Urethane Foam Tape 4026 Last Revision Date: April, 2009 Product Description 3M™ Double Coated Urethane Foam Tapes are conformable foams that offer high shear strength with a high temperature holding acrylic adhesive system for bonding to various types of surfaces for mounting, joining and holding. Product Features • The natural colored urethane foam tape products vary in color from white to light yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet radiation). This color change is normal and does not affect tape performance. • 3M™Double Coated Urethane Foam Tape 4026 is available in roll form and diecut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either individual pieces double linered with an extended liner on one side or in pads of 48 squares. Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Typical Physical Properties Property Values Adhesive Type 100 Adhesive Carrier Polyurethane Foam Liner Thickness 0.08 mm (3 mil) Color Natural Liner Color Green Plaid Test Name: Primary Thickness: Nominal 1.6 mm (62.5 mil) Thickness Tolerance 1.142 to 2.03 mm (45 to 80 mil) Additional Information View Page 2 of 6 Thickness: Nominal 62.5 mil Thickness Tolerance 45 to 80 mil Foam Density 290 kg/m³ (18 lb/ft³) Foam Density 18 lb/ft³ Liner Thickness 3 mil Typical Performance Characteristics Property Values Normal Tensile 275 kPa (40 lb/in²) Additional Information View Notes: (“T” Block); 1 in² (6.45 cm²); Jaw Speed 2 in/min (50 mm/min) Normal Tensile 40 lb/in² Notes: (“T” Block); 1 in² (6.45 cm²); Jaw Speed 2 in/min (50 mm/min) Tensile Strength 1240 kPa (180 lb/in²) Tensile Strength 180 lb/in² Elongation at Break 100 % Short Term Temperature Resistance 380 °F (193 °C) Short Term Temperature Resistance 193 °C Long Term Temperature Resistance 104 °C (220 °F) Long Term Temperature Resistance 220 °F View Page 3 of 6 Static Shear 2000 g (1000 g, 1000 g, 750 g) Static Shear 1000 g Static Shear 1000 g Static Shear 750 g Solvent Resistance No apparent degradation when exposed to splash tests of most hydrocarbon solvents. UV Resistance No apparent degradation when exposed to 7 days in U.V. chamber. Cold Flex No cracking when flexed around a 1/4 in (6.4 mm View mandrel). Temp C: -30C Temp F: -20F Available Sizes Property Values Note Subject to Minimum Order Requirements Standard Roll Length 32.9 m (36 yd) Standard Roll Length 36 yd Maximum Length 91 m (100 yd) Maximum Length 100 yd Available Width 1168 mm (46 in) Available Width 46 in Additional Information Page 4 of 6 Normal Slitting Tolerance ±0.8 mm Normal Slitting Tolerance ±1/32 in Electrical and Thermal Properties Property Values Dielectric Strength 8 to 12 V/μm Thermal Conductivity 0.062 W/m/K (0.036 (btu-in)/(h-ft²-°F)) Thermal Conductivity 0.036 (btu-in)/(h-ft²-°F) Additional Information Storage and Shelf Life Store in original cartons at 70°F (21°C) and 50% relative humidity. To obtain best performance, use these products within 24 months from date of manufacture. Recognition/Certification MSDS: 3M has not prepared MSDSs for these products which are not subject to the MSDS requirements of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for use, these products should not present a health and safety hazard. However, use or processing of the products in a manner not in accordance with the directions for use may affect their performance and present potential health and safety hazards. TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are exempt from inventory listing requirements. Bottom Matter 3M Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com Trademarks 3M is a trademark of 3M Company. Handling/Application Information Application Examples The urethane foam tapes are generally ideal for interior applications or for exterior applications where the tape will be protected from the environment. The urethane foam is open cell. 3M™ Double Coated Urethane Foam Tape 4026 – Mount air fresheners and soap dispensers Application Techniques • Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve Page 5 of 6 bond strength. • To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane. • Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Double-Coated-Urethane-Foam-Tape-4026/? N=5002385+3293087142&rt=rud Safety Data Sheet SDS https://www.3m.com/3M/en_US/company-us/SDS-search/results/? gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=4026 Family Group Link Tags: 4004 4008 Adhesive 4016 4026 Adhesive 4032 4052 Liner Products Carrier 4085 Thickness: Color Type 4056 Nominal Polyurethane 4032 4008 100 Natural Green Plaid Foam mm Polyurethane 2.79 to 3.81 0.08 mm Natural Green Plaid 3.2 mm 4085 4004 Natural Green Plaid 1.6 mm Foam mm Polyurethane 1.00 to 1.45 0.08 mm Natural Tan 1.2 mm Foam mm Polyurethane 5.46 to 7.24 100 0.08 mm Natural Green Plaid 6.4 mm Foam 4052 4056 100 Natural Green Plaid 1.6 mm Foam mm Polyurethane 0.64 to 1.02 0.08 mm Black Green Plaid 0.8 mm Foam mm Polyurethane 1.142 to 2.03 100 0.08 mm Foam 220 °F 193 °C 220 °F 193 °C 220 °F N/A N/A 193 °C 220 °F 193 °C 220 °F 193 °C 220 °F 93 °C 125 °F 1.142 to 2.03 0.08 mm 100 193 °C mm Polyurethane 4016 Resistance 1.142 to 2.03 0.08 mm 740 Resistance mm Polyurethane 100 Temperature Tolerance 0.8 mm Foam 4026 Temperature 0.64 to 1.02 0.08 mm 100 Long Term Thickness Liner Color Thickness Short Term Black Green Plaid 1.6 mm mm ISO Statement This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Information Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is Page 6 of 6 intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations, and the user must take any action required under any recall, field action or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.